Understanding the Oil Maintenance Light
The oil maintenance light on a Lexus RX350 is an indicator light that informs you when it is time to change your oil. This light is usually located on the dashboard and will be illuminated when it is time to change the oil. It is important to reset the oil maintenance light after each oil change to ensure the light will turn on again after the next oil change interval. Knowing how to reset the oil maintenance light on a 2010 Lexus RX350 can save you time and money.
Instructions for Resetting the Oil Maintenance Light
Start the engine and let it idle for a few minutes to allow the oil to circulate and warm up.
Place the gear selector in park and turn the engine off.
Open the hood and locate the oil dipstick.
Pull the dipstick out of the engine and wipe it clean with a cloth or paper towel.
Reinsert the dipstick and make sure it is fully seated.
Turn the ignition switch to the “ON” position, but do not start the engine.
Press and hold the “TRIP” button on the instrument panel until the maintenance light starts blinking.
Release the “TRIP” button and the maintenance light will turn off.
Start the engine and the oil maintenance light reset process is complete.
Tips for Resetting the Oil Maintenance Light
Make sure to use the proper grade of oil for your vehicle when performing an oil change. The wrong grade of oil can cause damage to the engine.
Check the oil level after each oil change to make sure it is at the proper level.
Make sure to use the correct oil filter when performing an oil change. The wrong oil filter can cause the engine to run poorly or even damage the engine.
If you are unsure which oil to use in your vehicle, consult the owner’s manual for the proper oil type and grade.
Frequently Asked Questions
How often should I change my oil?
It is recommended that you change your oil every 3,000 to 5,000 miles, depending on your vehicle’s manufacturer recommendations.
What type of oil should I use in my vehicle?
The type of oil you should use in your vehicle depends on the make and model of your vehicle. Consult your owner’s manual for the proper oil type and grade.
What happens if I don’t reset the oil maintenance light?
If you don’t reset the oil maintenance light, it will stay illuminated until it is reset. The light may also come on sooner than the recommended interval if it is not reset.
What happens if I don’t change my oil?
If you don’t change your oil, it can cause significant damage to your engine. The oil in your engine acts as a lubricant, and without it, the engine parts can rub together and cause excessive wear and tear.
What type of oil filter should I use?
The type of oil filter you should use depends on the make and model of your vehicle. Consult your owner’s manual for the proper oil filter type.
What is the difference between synthetic and conventional oil?
Synthetic oil is a man-made oil that is designed to provide superior performance and protection from wear and tear. Conventional oil is derived from crude oil and is less expensive than synthetic oil, but does not offer as much protection.
How do I know when it’s time to change my oil?
The oil maintenance light on your dashboard will illuminate when it is time to change your oil. It is important to reset the oil maintenance light after each oil change to ensure the light will turn on again after the next oil change interval.
What happens if I use the wrong oil?
If you use the wrong oil in your vehicle, it can cause significant damage to your engine. Make sure to use the proper grade of oil for your vehicle when performing an oil change.
What happens if I use the wrong oil filter?
If you use the wrong oil filter in your vehicle, it can cause the engine to run poorly or even damage the engine. Make sure to use the correct oil filter when performing an oil change.
How do I reset the oil maintenance light?
To reset the oil maintenance light, start the engine and let it idle for a few minutes to allow the oil to circulate and warm up. Place the gear selector in park and turn the engine off. Open the hood and locate the oil dipstick. Pull the dipstick out of the engine and wipe it clean with a cloth or paper towel. Reinsert the dipstick and make sure it is fully seated. Turn the ignition switch to the “ON” position, but do not start the engine. Press and hold the “TRIP” button on the instrument panel until the maintenance light starts blinking. Release the “TRIP” button and the maintenance light will turn off. Start the engine and the oil maintenance light reset process is complete.