Building a box jump for BMX is a great way to take your riding to the next level. Box jumps are an exciting and fun way to practice your tricks and help you gain confidence in the air. There are a few different ways to build a box jump for BMX and it is important to understand the basics before you begin. This article will provide a step-by-step guide on how to build a box jump for BMX so that you can get started as soon as possible.
Materials Needed
Before you start building a box jump for BMX, it is important to make sure that you have all of the necessary materials. The materials you will need include:
- A plywood board
- A saw
- A drill
- Screws
- Paint
- A tarp
- A hammer
- PVC pipe
- Sandpaper
Step 1: Cut the Plywood
The first step in building a box jump for BMX is to cut the plywood board. You will need to measure the length and width of the box jump you want to build and then cut the plywood board according to your measurements. Make sure to measure twice and cut once to ensure accuracy.
Step 2: Drill Holes for the PVC Pipes
Once you have cut the plywood board, you will need to drill holes for the PVC pipes. You will need to make two holes on each side of the board for the PVC pipes to fit into. Make sure the holes are large enough for the PVC pipes to fit snugly.
Step 3: Paint the Plywood
Once you have drilled the holes, you can then start painting the plywood board. You can use any type of paint that you like, but it is best to use a paint that is designed specifically for outdoor use. Make sure to evenly coat the entire board, paying special attention to the edges and corners.
Step 4: Secure the PVC Pipes
Once you have painted the plywood board, you can then start to secure the PVC pipes into the holes you have drilled. You will need to use screws to secure the pipes in place so they are firmly secured. Make sure to use the correct size of screws and that the pipes are secure.
Step 5: Place the Tarp
Once you have secured the PVC pipes, you will then need to place the tarp over the frame. This will help keep the box jump dry and protect it from the elements. Make sure to securely attach the tarp to the frame with screws and that it is evenly distributed.
Step 6: Sand the Plywood
The last step in building a box jump for BMX is to sand the plywood board. This will help ensure that the board is smooth and free from any rough edges or splinters. Make sure to use a fine-grit sandpaper and sand the entire board.
Frequently Asked Questions
What materials do I need to build a box jump for BMX?
You will need a plywood board, a saw, a drill, screws, paint, a tarp, a hammer, PVC pipe, and sandpaper.
How do I secure the PVC pipes?
You will need to use screws to secure the PVC pipes in place. Make sure to use the correct size of screws and that the pipes are secure.
How do I make sure the box jump is dry?
You will need to place a tarp over the frame of the box jump to help keep it dry and protect it from the elements.
What type of paint should I use?
It is best to use a paint that is designed specifically for outdoor use so that it will last longer and be more resistant to the elements.
Do I need to sand the plywood?
Yes, you should sand the plywood with a fine-grit sandpaper to ensure that it is smooth and free from any rough edges or splinters.
How do I know what size of plywood board to use?
You will need to measure the length and width of the box jump you want to build and then cut the plywood board according to your measurements.
What type of saw should I use?
You can use any type of saw that you would like, but a jigsaw is the most commonly used saw for this type of project.
Do I need to make holes in the plywood?
Yes, you will need to make two holes on each side of the board for the PVC pipes to fit into.
Do I need to use a hammer when building a box jump for BMX?
Yes, you will need to use a hammer to securely attach the tarp to the frame.
What type of screws should I use?
You will need to use screws that are strong enough to securely hold the PVC pipes in place. Make sure to use the correct size of screws.
How do I make sure the box jump is secure?
You will need to make sure that the PVC pipes are firmly secured and that the tarp is securely attached to the frame. Additionally, make sure that the board is sanded so that there are no rough edges or splinters that could cause injuries.